Make an enquiryContact Us
The 33 to 63 litre front loading 'Benchtop' autoclaves are available in two versions. Both require no plumbing, and operate from a standard single phase power supply. ‘Classic’ and ‘Ecofill’ models are available.
Astell benchtop 'Ecofill' units are one of the most energy efficient autoclaves available. The pressure vessel design ensures the absolute minimum amount of water is used during a sterilization cycle, which not only means comparably low power consumption, but also very quick heating and cooling.
A benchtop autoclave has a variety of uses, being suitable for sterilizing laboratory glassware, plastic receptacles and containers, petri dishes, un-wrapped instruments, media, and occasional discard loads.
In addition to laboratory use, it is not uncommon for benchtop autoclaves to be employed in other areas. In fact Astell regularly supplies its compact sterilizers for use in scientific research, process manufacturing, veterinary and medical healthcare industries to name but a few.
Model: AMB220 - Ecofill (33 litres)
Model: AMB420 - Classic Fill (33 litres)
Model: AMB230 - Ecofill (43 litres)
Model: AMB430 - Classic Fill (43 litres)
Model: AMB240 - Ecofill (63 litres)
Model: AMB440 - Classic Fill (63 litres)
The Astell Scientific range of 'Closed Door Drying' benchtop autoclaves are designed to offer convenience and flexibility in the sterilization of wrapped and unwrapped instruments.
Suitable for use in Dental and Veterinary clinics, these units offer sterilization for instruments and glassware with the added benefit of hot air drying. This type of autoclave is also sometimes referred to as a 'Class S autoclave' or 'Type S autoclave'.
Instruments for sterilization could include wrapped and unwrapped metal surgical instruments, unwrapped glassware and pouched hand tools.
N.B. It is recommended only medical accessories such as sterilization wraps, pouches, chemical indicators, and biological indicators are used with this autoclave.
Astell’s Closed Door Drying benchtop autoclave range is available in three sizes and is totally self-contained. These units require no plumbing, and only a standard single phase power supply. They are compliant with BS EN 13060:2014; ISO 9001:2015;
PED 2014/68/EU; ANSI/AAMI ST55:2010 standard; FDA 510(k) approved; and are manufactured to the principles of Medical Devices Directive (93/42/EEC).
This range of 'vacuum-less drying' steam sterilizers include Astell's 'Ecofill' water management system and are one of the most energy efficient autoclaves available. The pressure vessel design ensures the absolute minimum amount of water is used during a sterilization cycle, which not only means comparably low power consumption, but also very quick heating and cooling.
Model: UMB220 (33 litres)
Model: UMB230 (43 litres)
Model: UMB240 (63 litres)