Home   Ι   Products   Ι   Contact Us   Ι   Service Dept. & Technical   Ι   News and Exhibitions   Ι   Astell Worldwide
  Astell » Products » Autoclaves » Square Section Autoclaves » Manual Door - Vacuum
 

Square Section - Manual Vertical Door - Vacuum

High Standard Specifications - 125 to 360 litres (plus)

Suitable for a wide range of applications including: Fabrics, Porous Loads, Media, Discard, Waste, CAT III Applications etc. (NB - Certain applications may require additional options)

Manual Door Square Section Autoclave & Lab Technician

 

Please click here for the full range of options and Accessories.

Included as standard:

  • Ped compliant 316 Stainless Steel Pressure Vessel
  • Logi Touch Screen Controller - Multi Cycle
  • Integral Steam Generator (unless otherwise specified) 18/24/36/48kW
  • Manually Operated Door - Horizontally sliding
  • Vacuum System - Liquid Ring
  • Jacketed Water Cooling
  • Data Archiving
  • Exhaust Heat Exchanger
  • Low Overall width for ease of positioning

Additional Options / Accessories:

  • Air Ballast (Integral/External)
  • CAT III Compliance /Effluent Retention
  • Full Heated / Cooling Jackets
  • Data Recording Devices
  • Shelving & Loading Systems
  • Load Sense Process Timing
  • External Steam Generator eg. 72kW

Astell have many years experience in manufacturing Square Section units and can offer:

  • Bespoke Units
  • Special Vessel Sizes
  • Full Sterilizer Suite Installations
  • Units of 1000 litres plus

Please click Email to Request Quotation for either our standard units listed below, or for a unit to match your precise requirements

Reference

Vacuum
Door/s
Heating Type
Power Supply Phase Amps/Phase kW Total
Chamber Litres
Internal Chamber Dims w x h x d
Overall Dims w x h x d
NB - These are typical examples - Astell can manufacture almost any configuration - please contact us with details
MVS125G
Yes
1 Manual
Integral Generator
3 ph Neutral-38A 26kW*
125
500 x 500 x 500
780 x 1750 x 1200
MVS125D
Yes
1 Manual
Direct Steam
3 ph Neutral-6A 4kW
125
500 x 500 x 500
780 x 1750 x 1200
MVS216G
Yes
1 Manual
Integral Generator
3 ph Neutral-38A 26kW*
216
600 x 600 x 600
880 x 1750 x 1300
MVS216D
Yes
1 Manual
Direct Steam
3 ph Neutral-6A 4kW
216
600 x 600 x 600
880 x 1750 x 1300
MVS360G
Yes
1 Manual
Integral Generator
3 ph Neutral-38A 26kW*
360
600 x 600 x 1000
880 x 1750 x 1700
MVS360D
Yes
1 Manual
Direct Steam
3 ph Neutral-6A 4kW
360
600 x 600 x 1000
880 x 1750 x 1700

* Some applications may require a larger steam generator, therefore these values could increase.
 

Manual Door Square Section Model with Logi Controller

Product Literature

Guide to Autoclaving